this product is a kind of dispersion Monocomponent antistatic adhesive, which is widely used to paste many kind of antistatic and static dissipative sheet PVC flooring.

Application Instruction:

1. Make sure the floor clean, dry, smooth and without sand booming.

2. this product is no need to mix water. Stir thoroughly the product before use

3. Please use the B3 to spread glue uniformly on the substrate . According to the working temperature and humility, wait about 5-10min, then the substrate is ready to lay flooring and use the cork the press the flooring.

4. After the flooring material is applied on the substrate, press the surface by 50kg pressure roller to achieve the uniform effect, the sheet flooing should be flat and aviod stretching.

Technical Specification

substrate treatment:

The surface should be clean, dry flat, durable and no structural damage, and have strong resist compression, bending strength, no oil and demoulding agent. 

Features of performance:

1. Stable quality bonding, durable resilience

2. contain the conductive fiber

3. working time is long

4. Eco-friendly

5. Easy application, high coverage rate.

6. Good initial tack

Notice:

the best constracture environment is above 15degree and lower than 75% about humidity. 

don't pour the adhesive into the sewer and drain. the unsed adhesive should be seal. the tools can be cleaned with water.

it should be protected against frost and direct sun light during transportation, storage and application. Application temperature should not be lower than 5.