Application Instruction:

The surface should be clean, dry and strong without loose part loose layer. The substrate should be cleaned thoroughly.

this product is no need to mix water. shake the container uniformly, and then open and use it.

don't pour the product on the substrate directly. and should pour the primer into the roller tray.use the wool paint roller paint all of the substrate uniform and thin to avoid hydrops. you can start the next step after it dry out

Technical Specification

substrate treatment:

The surface should be clean, dry flat, durable and no structural damage, and have strong resist compression, bending strength, no oil and demoulding agent. 

Features of performance:

1. Stable quality bonding, durable resilience

2. Good water resistance, excellent bonding strength.

3. Very high initial tack and final bonding strength.

4. Easy application, high coverage rate.

Notice:

The product is eco-friendly, Non-flammable, low-voc .the best constracture environment is above 15degree and lower than 75% about humidity. 

it should be protected against frost and direct sun light during transportation, storage and application. Application temperature should not be lower than 5.