This product is produced with excellent formulation using special cement ,fine aggregate and spray-dried dispersible polymer powder and special additives. It is an ideal self-leveling material with high fluidity and plasticity, which is  widely used to the heavy commercial buliding and industry place.

Features of performance:

1. High fluidity, is capacity to extend service life and decorative effect of various floor covering

2. Easy to apply, quick setting, various floor-covering materials can be applied after short time.

3. High compressive and the tensile strength and alkali resistance.

4. Economical and practical

Technical Specification

Application Instruction:

      The surface should be clean, dry and strong without loose part. The substrate should be cleaned thoroughly. Before application of the compound the substrate should be applied by proper primer. When the primer is absorbed and the substrate is in a half-dry state, Start self leveling construction .

First, mix the product with water in the mixing ratio of self-leveling cement: water=25:6.5kg. The mixing method is: pour clean water into a suitable container, then add self-leveling cement while stirring vigorously until uniform viscous mixture is formed.

Pour the mixture on the area to be applied, spread the material uniformly to required thickness using toothed rake (range of thickness is 1-4mm).The mixture must be finished in 20min.

It is the next step to remove entrance air by particular roller.

Various flooring materials can be applied on it after dry.

Notice:

The product should be protected against frost and direct sun light during transportation, storage and application. Application temperature should not be lower than 5.

Safety and Health:

The product is environment-friendly product. It is doesn’t contain formaldehyde, chloride or aromatic hydrocarbon and heavy metal such as lead, mercury, cadmium at all. It is safe and nontoxictherefore it belongs to non-hazardous goods.